Autopsy Benches and Tables

CE 210 Elevating Bariatric Autopsy Table

The CE210 autopsy table is a pedestal style table that elevates with an easy switch. A standard feature of theCE210 elevating table is a Downdraft Ventilation System, which helps ventilate the body during an autopsy.

A hydro-aspirator is conveniently located near the sink basin for ease in collection and/or disposal of bodily fluids. Electrical receptacles are provided on both sides of the table. A hot and cold water faucet is provided with a single lever control and a vacuum breaker to safeguard the facility water supply. A deck mounted sink spray with a high pressure hose allows complete rinsing of the body or table with the press of a single lever.

The autopsy table has an integrally constructed large sink and is creased toward the centre for complete drainage.

The elevating pedestal consists of an Electro-Mechanical Actuator. The elevating pedestal is capable of lifting and lowering 8" (from 32" - 40") using an electro mechanical actuator. Maximum capacity is 1000 pounds.

CE210 Standard Features

	Table Top: The table top is fabricated of 14 gauge stainless steel with a #4 satin finish with built in large sink on one end.
	Electrical: Two G.F.C.I. electrical receptacles are positioned on each side of the pedestal.
	Integral Sink: Integral sink to front panel construction eliminates sharp eaves and ledges where bacteria can accumulate. All welded, seamless construction provides durability.
	Hydro-Aspirator: Located on the end of the table near the sink. The hydro-aspirator has a reversing valve to clear the aspirator of any foreign matter. The aspirator is designed to drain into the sink end for collection or disposal and is completely plumbed with control valve, vacuum breaker and tubing.
	Spray Tap: Swing spout tap with vacuum breaker protection.

DC 400 Bariatric Autopsy Cart

The DC400 Bariatric Autopsy Cart is used in conjunction with wall mounted autopsy sinks or as a simple viewing stretcher. Designed with heavy gauge wall tubing and a reinforced frame with an inset oversized top. Maximum capacity 1000 pounds.

The top is not removable and includes a drain built in the cart frame. The cart top measures 80.5" x 40" with a 1-1/2" profile and a return flange of 2 inches.

All carts feature Total Lock castor system with non corrosive 8" heavy-duty wheels. Castor wheel centre is fabricated using state-of-the-art polyimide plastic with polyurethane treads for years of lasting service. Locking and braking are accomplished through effortless pedal motion.

During autopsy, swivel and brakes on all castors are locked simultaneously from one position. During transport, one castor swivel is locked for easy mobility.

Shown with custom wall mounted autopsy sink

STANDARD FEATURES:

Drain with Rubber Plug

Extra Large Top (Non Removable)

Heavy-Duty Cart Frame, 1000lb Capacity

Castor with Total Lock System

Support Gussets

Available with low, rolled edges on platform to aid transfer

DC400 Standard Features

Cart Top (Non-Removable): Fabricated of 14 gauge stainless steel with a #4 satin finish. The top is permanently welded to the frame of the chassis.

Cart Frame: Fabricated of 1-1/2" extra heavy gauge stainless steel tubing. The frame is provided with additional cross tubing support. The top is also provided with a frame around the perimeter yielding additional support.

Gussets: Angle support gussets provided on each corner for extra strength.

Welding: All welding is TIG type welding utilizing only stainless steel as a filler media. All tubing is chamfered at 1/8" allowing for maximum penetration during the welding process. All weld fillets are approximately 1/4" diameter. All welds are brushed clean removing any weld burns and burrs.

Optional Features (See Below)

False Frame

Cover

Bariatric Concealment Trolley

Adding the DC410 frame and a concealment cover, to the autopsy cart allows for the discrete transport of a patient from the hospital room to the morgue and avoids the need for any further manual handling before autopsy.

After placing frame and body on carrier, place cover over the frame. The rectangular shape of the cover conceals the body, giving the illusion of a standard trolley while hiding the cadaver.

Concealment covers are made of black out material.

Vinyl covers can be easily cleaned.

Concealment Cover - Bariatric

Fits DC410 Bariatric frame.

Dimensions 80 3⁄4" L x 40" W x 20" D

Color is white.

Place cover over frame

Heavy Duty Concealment Cover - Blue

Outside of cover is dark blue.

Can be easily cleaned with a damp cloth.

We can also supply you with custom covers that will fit your particular concealment trolley.

Simply supply customer service with exact measurements and we will supply you with a quote.

Bariatric Bed Concealment Cover

Converts almost any bed into a temporary concealment trolley. A simple strap from the headboard to the footboard holds the cover clear of the body. The cover fits over the headboard, footboard and side-rails. with an elasticated skirt creating a snug fit. The cover can be used on most 3ft or 4ft beds, or the Baros Supreme Adjustable bed.

There is no longer a need to transfer a bariatric corpse to a trolley. Using this simple, inexpensive discreet cover, you can transport bariatric corpses directly to the mortuary.